Meet the Brand: Ventura Systems
We catch up with Leon van der Tuuk from Ventura Systems to find out more about their brand and exhibiting at Euro Bus Expo, on stand 375.
Tell us a bit about your company?
Ventura Systems is the leading manufacturer of innovative door systems for urban transport. Our products are delivered worldwide to many renowned manufacturers of buses, urban trucks and autonomous vehicles. We are driven by a passion for improving the quality of urban transport, helping to create safer, greener and smarter cities.
Ventura Systems has its own design, engineering and manufacturing centre based in the Netherlands and an additional manufacturing centre in North America. Our sales and service offices are located on four continents: Europe, Asia, North America and Oceania.
Our door systems welcome millions of people every day. They are proven on every continent and in every major city. Our leading technology, based on our legacy of more than 30 years of field experience, is powering the next generation of mobility today. And tomorrow.
Tell us about your latest product(s), service(s), promotions or launches visitors can hope to see on your stand?
Ventura Systems will be showcasing two door systems at Euro Bus Expo: Our new fifth generation Inward Gliding door system and our third generation Plug Sliding door system.
The fifth generation of Ventura Systems’ Inward Gliding door introduces a new approach to door kinematics and sealing, further enhancing safety, reliability and comfort for drivers and passengers.
At the core of the system is an innovative lifting movement of the door leaves. This unique kinematic design allows the door to compensate for the inclination of the vehicle floor. When opening, the door leaves are lifted clear of the floor, ensuring smooth and unobstructed movement. When closing, the door returns to its lower position in a controlled ‘drop movement’, aligning precisely with the portal and fixation points to create a secure and consistent seal.
Building on more than 30 years of experience in urban transport, Ventura Systems’ third generation Plug Sliding door system raises the standard for safe, reliable and efficient passenger access. Developed in line with ISO 26262 functional safety, the system integrates risk assessment, redundancies and mitigation measures throughout its design. Its fully electric operation eliminates pneumatic components, supporting dependable performance and simplifying integration into modern vehicle platforms. The new generation is also lighter, slimmer and smarter: optimised rubber geometry reduces weight and material exposure, while improved passenger detection and precise motion control enhance protection and performance. At its heart, the future-ready DCU 2.0 continuously monitors door speed and position. The result is a refined, intelligent door system that retains Ventura Systems’ proven sealing performance while giving vehicle manufacturers greater freedom in layout and interior design.
Ventura is also showcasing a demo called DAS: Door Adjustment By Sensors
DAS is a new tool to objectively assess the installation quality of its door systems. Using sensors and a machine learning-based algorithm, the system analyses measurements and identifies deviations from normal installation conditions. This evidence-based approach helps engineers make precise adjustments, supporting reliable door operation from the start of the vehicle lifecycle.
Why is exhibiting at Euro Bus Expo 2026 an unmissable opportunity for you?
Ventura Systems is pleased to return to Euro Bus Expo, an event that provides a valuable opportunity to connect with the UK public transport industry and showcase our latest developments in door technology. Having exhibited at Euro Bus Expo every other year since 2020, we know the value of being present at an event that brings together public transport operators, authorities, manufacturers and industry professionals from across the UK and beyond. The UK is an important market for Ventura Systems, and our presence is strengthened further by our UK partner, Transport Door Solutions. Together, we are committed to building strong relationships within the UK market and supporting the development of safe, reliable and efficient public transport.
For Ventura Systems, Euro Bus Expo is a chance to actively engage with the industry, exchange knowledge and demonstrate how our technology continues to develop in response to the needs of modern public transport. At the exhibition, we look forward to showcasing our latest innovations, including new door systems, developments in rubber design and solutions aimed at improving passenger and driver safety. It is also an opportunity to demonstrate the expertise and experience Ventura Systems brings to the international market. For these reasons, Euro Bus Expo is an important exhibition for Ventura Systems and one we are very much looking forward to being part of again.
Meet the Ventura Systems team at Euro Bus Expo on Stand 375.
Click here to get your free ticket
Konvekta Demonstrates Why the Overall System Makes the Difference in Electric Bus Thermal Management
At Euro Bus Expo 2026, Konvekta will demonstrate why the overall system, not just the refrigerant, makes the difference in electric bus thermal management.
Electrification is fundamentally changing the requirements for heating and air-conditioning systems. While vehicles with conventional drive units could use waste heat for heating, the heat required in electric buses must be provided and distributed efficiently.
At the same time, not only the driver’s compartment and passenger cabin, but also the battery and other temperature-sensitive components must be maintained within defined temperature ranges. Thermal management has therefore become an essential part of a vehicle’s operational and energy management strategy. For operators, energy consumption, driving range, passenger comfort and cost-effectiveness are particularly important.
The CO₂ heat pump as a key component
The heat pump plays a central role in this process, enabling existing thermal energy to be distributed wherever it is needed within the vehicle. In addition to energy extracted from the ambient air, waste heat from the battery, drive unit components or other systems can also be integrated, depending on the vehicle and system architecture. This helps to reduce the amount of energy drawn from the traction battery for heating.
CO₂ heat pump systems provide efficient heating even at low ambient temperatures and are also well suited to vehicle preconditioning. With a properly designed system, the heat pump can cover most of the heating demand during normal operation. Depending on the system configuration, additional electric or conventional heating may no longer be required, or may only be needed as a backup.
The refrigerant alone is not the deciding factor
For many years, Konvekta has placed a strong emphasis on CO₂ as a natural refrigerant. It is non-flammable, PFAS-free and has a Global Warming Potential (GWP) of 1.
However, the choice of refrigerant is only one part of the overall technical assessment. What matters is how the heat pump, heat sources and control systems work together and how they are integrated into the vehicle. Energy efficiency, operational safety and cost-effectiveness must also be considered across the entire life cycle.
In addition to CO₂, Konvekta works closely with customers to develop heat pump systems using alternative refrigerants, such as propane. CO₂ remains a key technological focus for the company, based on many years of experience, proven series production and its specific properties.
Different vehicles require different solutions
Thermal management requirements vary depending on vehicle type and operating profile. Konvekta’s CO₂ heat pump technology, with more than 15,000 systems proven in the field, can be tailored to individual vehicle requirements using over 800 parameters.
This also allows specific requirements to be addressed, for example in electric double-deck buses with two passenger decks and different thermal zones. The result is a proven system that can be individually integrated into the vehicle concept.
Konvekta looks forward to welcoming visitors and discussing the thermal management requirements of modern electric buses.
Visit Konvekta on stand 284 at Euro Bus Expo 2026, 3–5 November, NEC Birmingham.
Driving the future of passenger transport: Hankook exhibits at Euro Bus Expo 2026
Hankook Tyre UK will exhibit at Euro Bus Expo for the first time, showcasing its latest bus and coach tyres and launching the LB01, a first-of-its-kind hot-cure remoulded urban bus tyre developed with Vaculug.
2026 marks another significant milestone for Hankook as it strengthens its presence in the UK’s passenger transport sector. Taking place from 3–5 November at the NEC Birmingham, Euro Bus Expo brings together operators, manufacturers, suppliers and key decision-makers for three days of innovation, insight and networking.
A comprehensive bus and coach tyre portfolio
On stand 38, the Hankook Tyre UK team will showcase its latest range of bus and coach tyres, with a strong focus on innovation, sustainability and performance. Products on display will include:
- Hankook Smart Touring AL22: a long-distance coach tyre designed for handling performance and high mileage.
- Hankook Smart City AU04+: engineered for urban durability, with strong resistance to stop-start conditions.
- Hankook Smart City AU06: developed to deliver reliable performance in demanding city environments.
- Laufenn LF60: offering dependable all-position capability for mixed-use applications.
- Hankook e-Smart City AU56: Hankook’s newly developed, dedicated EV bus tyre, optimised for low rolling resistance, reduced noise and the higher load demands of electric vehicles.
All tyres in the Hankook urban bus range feature built-in, measurable sidewall protection. The e-Smart City AU56 underlines the company’s commitment to supporting fleet electrification and more sustainable transport solutions.
Launching the LB01 with Vaculug
In collaboration with its long-standing partner Vaculug, Hankook will introduce the LB01, a first-of-its-kind hot-cure remoulded urban bus tyre. The launch underscores the strength of the Hankook–Vaculug partnership and reinforces Hankook’s position as a provider of total tyre solutions across the full tyre lifecycle.
It also reflects Hankook’s commitment to delivering cost-efficient, high-performance and environmentally responsible mobility solutions for commercial fleet customers. Supported by Vaculug’s award-winning expertise in sustainable manufacturing, recently recognised with the King’s Award for Enterprise, the collaboration further strengthens Hankook’s role in advancing practical circular economy solutions without compromising performance.
For Hankook, Euro Bus Expo 2026 provides a strong platform to enhance brand visibility, build new relationships and reinforce its position as a forward-thinking leader in the commercial bus and coach tyre market.
Visit Hankook Tyre UK on stand 38 at Euro Bus Expo 2026, 3–5 November, NEC Birmingham.